अमूर्त

Response of Circular Footing by Varying the Vertical Spacing of Reinforcement Resting on Structural Fill

Vivek Verma , L. K. Yadu

Non availability of suitable construction site due to rapid growth of population requires use of low laying areas. Low laying area can be used by suitable structural fill. Well compacted granular fill materials are commonly used to fill the low laying areas. Sometimes, it is required to strengthen the granular fill with some suitable reinforcing materials to increase its bearing capacity. Vertical spacing between reinforcement layers is one of the important geometric parameters which affect the response of the footing resting on granular fill material. In the present study granulated blast furnace slag (GBFS) has been used as granular fill and response of circular footing has been evaluated by varying the vertical spacing of geogrid reinforcement. Response of circular footing obtained in terms of increase in bearing capacity and decrease in the settlement. Vertical spacing of 0.3D has been obtained as optimum and optimum spacing of geogrid reinforcement increases the bearing capacity by 95% and decreases the settlement by 48% as compared to footing resting on unreinforced GBFS bed. Experimental test results were compared with numerical simulation and found reasonable match with experimental results.