अमूर्त

Modeling and Structural Analysis of Disc Brake

Praveena S, Lava Kumar M, Sreekanth Reddy S

The disc brake is a device used for slowing or stopping the rotation of the vehicle. Number of times using the brake for vehicle leads to heat generation during braking event, such that disc brake undergoes breakage due to high stress. The transient stress and structural analysis is preferred to choose the low stress material for better performance. Disc brake model is done by CATIA and analysis is done by using ANSYS workbench. The main purpose of this project is to study the analysis of the stress for the Aluminium, Grey Cast Iron, HSS M42, and HSS M2. The stress and structural analysis is performed for four materials and the stress is established in the disc for different materials. A comparison between the four materials for the stress values and material properties obtained from the stress analysis and structural analysis low stress material is preferred. Hence best suitable design, low stress material Aluminium is preferred for the Disc Brakes for better performance.

अस्वीकृति: इस सारांश का अनुवाद कृत्रिम बुद्धिमत्ता उपकरणों का उपयोग करके किया गया है और इसे अभी तक समीक्षा या सत्यापित नहीं किया गया है।

में अनुक्रमित

Academic Keys
ResearchBible
CiteFactor
Cosmos IF
RefSeek
Hamdard University
World Catalogue of Scientific Journals
Scholarsteer
International Innovative Journal Impact Factor (IIJIF)
International Institute of Organised Research (I2OR)
Cosmos

और देखें